Spare parts washer with excellent cost performance is simple.
Spare parts washer made by gears manufacturer specializing in metal processing.
- Cleaning arch rotates in water pressure without the use of a motor.
- Rinse over the dirt in 360 degrees.
- Washing water is economical recycling use.
- Safety design that does not close the lid and vibration shaking in taking out and put in the parts.
- Car maintenance factory, metal precessing factory, and other general industry.
| Model | IPC-2-1 |
|---|---|
| Washing method | Arch turning spray detergent |
| Washing water | Recycle method |
| Tank capacity | 150L |
| Pump | Multistage centrifugal pump |
| Washing pump capacity | 0.38MPa 150L/min 2.2kw |
| Washing detergent | Specilize detergent |
| Washing work max dimension | Φ630×H300mm |
| Washing work max weight | 100kg |
| Working time | Able to set anytime |
| Hot water heater | 5kw |
| Electric capacity | 5kw |
| Net weight | About 189kg |
| Net dimension | W1019×D1105×H1010mm |
| Model | IPC-3 |
|---|---|
| Washing method | Arch turning spray detergent |
| Washing water | Recycle method |
| Tank capacity | 186L |
| Pump | Multistage centrifugal pump |
| Washing pump capacity | 0.37MPa 320L/min 3.7kw |
| Washing detergent | Specilize detergent |
| Washing work max dimension | Φ1000×H700mm |
| Washing work max weight | 400kg |
| Working time | Able to set anytime |
| Hot water heater | 5kw×2 |
| Electric capacity | 10kw |
| Net weight | About 470kg |
| Net dimension | W1406×D1466×H1652mm |
Full auto, simple operation, so everybody could use this Car air conditioner gas cleaner
- Full auto, simple operation, after setting capacity, just press button Start to select courses.
- Cleaning and filling gas, besides that it is compatiblewithall seasonbyusing liquidfillingmethodat low temperatureswithout starting car’s engine.
- Display big Led light, so it is easy to follow the operation process.
- High function type, able to operate independently based on manual operation and using high accuracy load cell.
- Cleaning and filling gas into Car air conditioner gas HFC-134a.
- Most of them using at gas station, maintenance factory, car shop, etc。
- Get back gas from outside machine
| Model | YN-12-Ⅲ |
|---|---|
| Name plate | CFC Gas recovering, recycling and filling equipment “JUNPU” |
| Application | HFC-134A |
| Light capacity | About 3.6L(About 4,000g) |
| Filing quantity | Cleaning ：10～2,000g(10gUnit) Gas support：10～2,000g(10gUnit) |
| Oil seperator | Only use for Oil seperator |
| Basic function | Cleaning: Recover, recycle →Vacuum→Fill→Finish Gas support: Measure→Fill→Finish Manual operation: Recovery, recycle, Vacuum, Fill chemical |
| Recovery capacity | 100g/minute |
| Measurement method | Weight loadcell method |
| Recycle | Dry filter (Change method) |
| Safe equipment | Pressure sensor, safe valve, fuse, thermal magnetic switch |
| Safe display | In case occur full liquid, extraordinary pressure, or miss operation, it will display error lamp and warning buzzer. |
| Sticking service can | 1 |
| Sticking chemical can mouth | 2 |
| Compound gauge | High pressure measurement: -0.1～3.5Mpa
Low pressure measurement: -0.1～1.7Mpa |
| Electric power | AC100V 15AOver 50/60Hz |
| Outside size | 574mm(W)×579mm(D)×1130mm(H) |
| Weight | About 80Kg |
| Temperature | 5～40℃ |
| Attached parts | O ring for high pressure plug: 1 pcs; O ring for low pressure: 1 pcs; Dry filter: 1 pcs; Plug for charge van: 3 pcs; Packing for charge van: 2 pcs; Analog thermometer: 1 pcs; Waste oil bottle: 1 pcs; Fuse can: 1 pcs; Handling instruction: 1 set; Check seal: 1 set |
